Not sure how tight to go? Most cnc machining tolerances start near ±0.005 in. (±0.127 mm) for metals, and tighter limits like ±0.002 in. cost more, so tighten only where a feature needs it.
For the wider picture, read the guide to precision cnc machining.
| Tolerance level | Typical value |
|---|---|
| General standard (metals) | ±0.005″ (±0.127 mm) |
| High precision | ±0.002″ (±0.051 mm) |
| Reamed holes | ±0.0005″ (±0.0127 mm) |
| ISO 2768 fine class, 0.5-3 mm dimensions | ±0.05 mm |
| ISO 2768 fine class, 3-6 mm dimensions | ±0.1 mm |
These figures come from the MakerVerse tolerance guide and the Protolabs design tip. They can change, so check the source before you rely on them.
What a tolerance actually means
A tolerance defines how much a dimension can vary from its nominal value without affecting function, according to MakerVerse. Its example: a 2.550″ dimension with a ±0.001″ tolerance allows a range from 2.549″ to 2.551″.
The same idea works in metric. MfgRobots describes a hole specified at 10.00 mm ± 0.05 mm that can measure anywhere between 9.95 mm and 10.05 mm and still be within tolerance. Smaller tolerances mean higher precision, and usually higher cost.
The concept is old. Protolabs notes that Eli Whitney is credited with the idea of interchangeable parts, which he presented to the United States Congress in 1801.
According to MfgRobots, tolerances come in several kinds:
- Dimensional: the allowed deviation in the size of a feature, such as length, width or diameter.
- Geometric: the allowed variation in shape, position or orientation, such as flatness, parallelism and concentricity.
- Fit: how two parts go together, from a clearance fit that moves freely to an interference fit that needs force to assemble.
- Surface finish: roughness measured in Ra, where a lower value means a smoother surface.
Standard cnc machining tolerances you can expect
Shops tend to publish a default tier and a tighter one. MakerVerse lists three common levels:
- General standard: ±0.005″ (±0.127 mm) for metals, good for prototypes, general-purpose parts and non-critical features.
- High precision: ±0.002″ (±0.051 mm), used for tight fits and critical features where performance depends on accuracy.
- Reamed holes: ±0.0005″ (±0.0127 mm), for precision fits such as pins, shafts or press-fit components.
As one neutral example, Protolabs states a standard tolerance of +/- 0.005 in. (0.13mm) at its automated factory. It also quotes +/-0.002 in. (0.051 mm) for precision work, and +/- 0.002 in. on feature locations when those features are machined on the same side of the part.
Treat these as one provider’s published capability, not a universal limit. Your own drawing and the shop that makes the part decide what is realistic.

Why tighter tolerances cost more
Per MakerVerse, tighter tolerances often require:
- slower machining speeds,
- more tool changes,
- additional quality checks.
That adds lead time and production cost. MakerVerse warns that over-specifying tolerances can lead to unnecessary expense.
Protolabs adds that an overly stringent tolerance might send parts to a secondary grinding or EDM operation, unnecessarily increasing costs and lead-time. Looser is not automatically safe either: tolerances that aren’t in line with those of mating parts can make assembly impossible.
For the other levers that move a quote, see the notes on cnc machining cost factors.
Standards behind the numbers
Three standards come up most often when tolerances are written on a drawing:
- ISO 2768: MfgRobots says most manufacturers default to ISO 2768 when no other tolerance standard is specified. In its fine class, MakerVerse gives ±0.05 mm for 0.5-3 mm dimensions and ±0.1 mm for 3-6 mm.
- ASME Y14.5: the specification behind Geometric Dimensioning and Tolerancing (GD&T), described by Protolabs as the industry standard for part tolerancing.
- ANSI B4.1: per MfgRobots, it categorizes fits into clearance, transition and interference.
Protolabs says its semi-automated factory and network follow ISO 2768-1-1989-f for metals and ISO 2768-1-1989-m for plastics. That split is a reminder that the material changes which class applies.
How to choose a tolerance for each feature
A simple order of work keeps tolerances honest. The first two steps follow Fictiv; the rest follow MakerVerse.
- Determine the function of each geometric feature.
- Analyze the mating components and how your part interfaces with them.
- Start standard: use ±0.005″ (±0.127 mm) unless function demands more precision.
- Be selective: only specify tolerances on features that affect fit, function or assembly.
- Use GD&T when form and orientation matter more than size.
- Flag very small features (under 0.5 mm), which may need explicit tolerances and special tooling.
Because Protolabs applies different ISO 2768 classes to metals and plastics, read about cnc machining materials before you lock in a callout.
Frequently asked questions
What is a standard tolerance for CNC machined metal parts?
Show answer
MakerVerse lists ±0.005″ (±0.127 mm) as typical for metals. Protolabs states +/- 0.005 in. (0.13mm) as its standard at its automated factory.
Can CNC machining hold ±0.0005 in.?
Show answer
On reamed holes, yes: both Protolabs and MakerVerse list ±0.0005 in. for that feature. It is a feature-specific figure, not a general default for a whole part.
Do tighter tolerances always cost more?
Show answer
Often, yes. MakerVerse points to slower speeds, more tool changes and extra quality checks, which raise lead time and cost.
What does GD&T add beyond size tolerances?
Show answer
According to MakerVerse, GD&T under ASME Y14.5 controls flatness, concentricity and position when form and orientation matter more than size.



